9KhS, Soviet chromium-vanadium high carbon steel blade, Caucasian Walnut handle, Brass inlay, guard and butt, Textolite spacers

Theres ornamentations on the blade I don't want to damage

From casting my own resin to grinding and hardening don’t forget the leather work. And they half to match ya that sucks. But very happy with the results and can’t wait to never see them again.

Noblie Custom Knives folder

So i have never made a blacksmiths knife before, even though i have been making knives for a little over 2 years now, this is my first ever attempt and i can say without a doubt that its not the greatest thing I've made, i will be making more though since this was a super fun project and the fit and finish of the handle relies almost solely on my ability as a smith, what do you guys think? Quenched in water and tempered for 1 hour and 30 minutes at 450, also do you like it with or without the furleather wrap? Makes it feel caveman ish to me.

Final finished photo of my first slipjoint

This one was a gift for my Dad

Nitro V stainless steel blade

416 stainless Integral bolster/liners

Stabilised Tasmanian Blackwood scales with domed 416 stainless pins

Hi all,
I’m about to finish my 3rd knife and have gotten what I think is a very nice mirror finish so far. I’ve hand sanded up to 3000 grit then polished on buffing wheels with a cheap kit off amazon on a bench grinder. I used the softest wheel with the green compound only on the bench grinder. Link to the kit I used - https://a.co/d/09GbQaKU

My question is should I use something like Flitz metal polish to do a final polish or some other similar product? Or would I not get much benefit from something like that and just leave it as is?

I live in a rural setting and have a dedicated shop building. Im always worried about security. What do others do?

This is my first ever knife project, and I wanted to showcase it. I made it out of an old Sheffield chisel I got for CA$2.00 in the basement of an antique shop, and I forged it into shape, hardened and tempered the steel, ground the bevels, sanded the blade, whittled the handle, sharpened it up, and oiled the whole thing.

I'm really proud of how it came out, and I'm impressed by the sharp edge I was able to get, despite the steep (20°) bevel, although it's not a great slicer, as it has a lot of thickness behind the edge so it can withstand heavier jobs for camping and bushcraft.

I would love to hear what you guys think!

Mosaic guards, bronze spacers, african blackwood handles.