I finally got rid of my Corsair AIO.

Specs :

9800x3d, Astral RTX 5090, 32GB DDR5, 4TB 9100 pro, MSI x870e tomahawk, Corsair RM1200x and bunch of icuelink fans.

Interesting comparison. Too bad they are super limited quantity. Shows the future of metal fans in consumer PC cooling.

My custom "Steam Machine" in the Lian LI Dan A3 case, for couch gaming.

I originally used the Nh-D15 g2 cooler, but didn't have space for the Wireview pro 2, so went for Thermalright Phantom Spirit and replaced the stock fans with Noctua fans.

Originally had three bottom fans, but it got W bit tight for the GPU cable, so dropped the middle one.

The setup is a bit different from most builds i've seen in this case, as I have intake in the back (and bottom), and exhaust on top. Seems to work very well. Its a really nice case for small-ish builds!

My first PC build with some Noctua fans.

7 year old case and 9 year old fans, bear with me.

I wanted something minimalistic 🖤

Here's what came out of it after sitting on parts for almost a year.

Specs if anyone is curious:

- HAVN BF 360 Flow case

- AMD Ryzen 7 9800X3D

- Noctua NH-D15 G2 chromax.black

- MSI MAG X870E TOMAHAWK MAX WIFI

- G.Skill Flare X5 64GB (2x32GB) DDR5-6000 CL30

- Samsung 990 Pro 2TB NVMe SSD

- WD_Black SN850X 2TB NVMe SSD

- ASUS ROG Astral RTX 5090

- ASRock Taichi TC-1300T 1300W 80 PLUS Titanium (ATX 3.1 / PCIe 5.1)

Given the price of gpu's nowdays having water above it was keeping me up at night.

this is the best I could do with the chonky lf3 420, should be able to fit the lc1 360 in a push pull on the side, just waiting for the chromax version...

/pokes noctua

Any word on that?

I just upgraded from a 12700k. I currently use a u12a that had the fans swapped out with some corsair RGB fans. Yes yes, flame me but they were quiet and I never noticed any noise. Now with the 270k It is a night and day difference on noise. Those corsairs sound terrible at high rpms.

Question for anyone who has the same cpu. Should I just throw the noctua’s back on and call it a day? Or can I see a big difference with noise if I put a d15 or another 140 cooler on?

Hi.
Couple of days ago i asked about AIO...but i rule that out cuz i would need whole new cas and all of that.
But i still like the idea of a new cooler.

I have smaller case (Fractal Design Focus G Mini) and i checked i can get D15S to fit.
Now i have U12S.
CPU is 5800X3D.
When i try the Aida64 test i get like 90.5C max (but that i stress).
When gaming i get around 75-85 depends on the game...all that with locked 60FPS.

Do you think the D15S will be better or not that much?

It is not about money(it is not that expensive) but iam in a "mood" for new CPU cooler :-)

270k RTX4080 in NZXT h6 flow with NH-D15S and 3 Chromax

Pcpartpicker says it wont fit but it does and works great, My cpu/gpu are at in the 50 60 degrees when gaming

Whats the best case for many noctuas? My budget is ~200€. I need atleast 3x 140mm fronpanel fans and 3x 140mm top fans.

So i have bought my Noctua NH-U12S cooler back in july 2020 to fit my AM4 system and im planning to upgrade my system to AM5 sooner or later. Gemini tells me the bracket holes are the same but i want to make sure as i hear it also depends on when exactly i've bought it because that original fan didnt fit AM4, only with the bracket adapters that came with my unit. So is it fully compatible with AM5 or do i need to obtain a different adapter for it?

I've been trying to organize my computer parts, but these ones are giving me a problem.

They're older parts and there are no product pages for them that I could find. Searching the internet I've seen both of them listed as NA-AV1 which doesn't seem right as Noctua is generally pretty good about using different part numbers even for parts that are very similar.

For what it's worth I believe the top version was the original and the bottom might be a newer revision though I think both may be discontinued at this point in favor of the longer versions.

It's not a terribly important question, but if anyone knows I'd like to label them correctly.

I have a PC with Thermaltake view 71 argb full tower case. Stock fans worked fine, but after years all of them started making some rattling noise (which means bearings are worn out) and I want to change them.
I want to replace them with Noctua NF-A14x25 G2 PWM Sx2-PP chromax.black by the scheme on the 2nd photo. But as far as I understand (1st photo) my case needs 3 vents on the top?
What happens if I put 2 of them instead of 3?

Take a look ate the place far past the world of diminishing returns 😂

Had a go at fitting the Noctua GPU and D15-G2 into the lian Li vision in vertical orientation.

As I wanted to retain 2 exhaust fans on the rear with the motherboard in the upper position, there was some shoehorning needed.

I custom made a GPU riser to move the GPU 30mm to the right to give rear fan clearance behind, while managing it to sit 2mm off the lower case fans.

I moved the D15 to the upper cooling position on my 9800X3D to give 5mm clearance on the GPU.

And with all that the Noctua GPU squeezed in there

As you can see, CPU idle is in the 30s, and runs in the 70s on cinebench benchmark. GPU tops out in the 60s still, cooling is pretty efficient, - this is all at 24 degrees ambient room temp.

Also 3D printed flashing set to tidy it all up wrapped in walnut.

I feel like it’s missing the heart of the build w/o the aio but idk what I’d do with the extra fans lol

Noctua recommends one intake and one exhaust for my pc case, but I have heard the top intake fan has marginal benefits and is arguably worse?

Would it be better to have one top exhaust fan?

I have the north xl edition of this case that also has a glass side panel and will be using:

3x NF-A14x25 G2 for front intake

1x NF-A12X25 G2 for back exhaust