This started as a silly little creative experiment I’ve been tinkering with lately.

I’ve always loved odd, whimsical natural art, so I decided to build a tiny woodland jazz ensemble. Every beetle here is prepared, posed, and mounted entirely by my own hands. I fitted each performer with these miniature brass instruments — saxophones and a French horn — then set them onto small tree slices I collected, to give them their own little forest stage.

Putting them together was trickier than I expected. Getting each beetle balanced just right, lining up the tiny instruments, and making sure everything stayed in place took a lot of slow, careful work. Each one ended up with its own subtle pose and personality.

I really enjoy the contrast between the deep, glossy shells of the beetles and the bright, shiny little brass instruments. It feels like they’re all about to start a quiet jam deep in the woods.

Regular balloon, or heart balloon?

Hi everyone! I'm a needle felting artist from Taiwan~

I recently finished this little rainbow cube cat, inspired by a child's drawing!

The idea actually started when a relative saw a needle-felted charm I'd made based on my son's drawing. Her child loved the rainbow colors and wanted a rainbow body for their own little cat too!

I had a lot of fun experimenting with different materials for this piece. The heart-shaped nose was originally a little heart-shaped eye I found at a craft store, and I made the eyes myself using clay and paint.

I also had some colorful sprinkles lying around and thought they'd make a cute addition to the design!

But the biggest challenge was definitely the cube shape!

I thought using pre-made wool balls as a base would save time, but the wool kept compressing as I worked. I had to repeatedly add more wool to maintain the shape, and the colorful surface layers kept getting pushed deeper into the base.

Getting everything smooth, square, and colorful took so much more work than I expected!

In the end, I spent over 8 hours making this little guy. It was challenging, but I genuinely enjoyed experimenting and figuring things out along the way.

And honestly, I almost didn't want to let this little cutie go! 🥹

I'm really happy with how it turned out, and I hope you enjoy watching the process!

I'd love to hear about your experiences too. Have you ever made something that turned out to be much harder than you expected?

Thanks for reading! I'm looking forward to seeing more of everyone's amazing creations here! ❤️

Meet this autumn girl 🍂

With her auburn curls, tiny freckles, and forest-green dress embroidered with wildflowers, she brings to mind autumn meadows and golden leaves. A mustard knitted cardigan and little crocheted shoes complete her cozy outfit. 🌿

She’s 7” (18 cm) tall, made from cotton jersey and filled with 100% organic sheep wool, with soft mohair bouclé hair.

I don't usually love cherry, but I do like it in this "brick wall" style combo with the walnut. The "mortar" is hard maple. Each brick is 3 1/4 in x 1 1/2 in. The mortar is 3/16in wide. The finger grooves are carved to a depth of 11/16 in, 5/8 in wide, and 5 in long.

I forgot to bring a fork, so I made one. ¯_(ツ)_/¯

First I want to apologize if this iconography offends anyone’s religion. It is just a video game costume.

So, I have been crafting a Necromancer costume for my 20 yr old son for Comic Con which is on Halloween this year (inspired by the Diablo 4 game). I used eva foam, and then foam clay to sculpt a rib cage on the chest and painted it. Then my son asked me to carve a upside-down pentagram in the sternum, which I drew on with a pencil but accidentally did that right side up. I erased the pencil lines, and repainted over them, but they’re still visible. Is there any special kind of paint anyone can recommend to cover over the pencil lines of the right side up pentagram?

I used a cardboard box, duct tape, electrical tape, some reflective tape for the brakes and some packing tape!

All the garbage truck costumes (the few there were) were missing the mark so I made him one! The blurs are a customized license plate with his initials and our town’s trash collection company logo.

In total it probably took 6-7 hours to make!

Hi! New poster here, and I’m on a time crunch before Halloween, so I apologize if I’m not using proper formatting.

like to make myself an owl masquerade mask sort of like the references above, to match the face of a character in the third pic. I know I’ll need to get feathers and perhaps some thin black semi see through material to make the eyes black. But I’m struggling to fashion a base for it. I‘m not finding any blank masquerade masks that have a small beak below the nose.

Any ideas of how to make a beak attachment to a mask, or other solutions on how to achieve this? TYIA

I have this GORGEOUS bag, handmade, but I forgot it too long behind a door and it got mould, which stained the front. 😭
I added a picture of both the front and back so you can better see the difference.😭
Any ideas how I can fix that?
Thanks in advance!

I’ve done a thorough Reddit and Google search to see what the best irons are for smaller projects with fabric and what not. Does anybody have solid recommendation on models or manufacturers for irons that are powerful, have adjustable heat settings, and/or aren’t super bulky and heavy? Having a big ole iron sometimes is more of a pain than anything with my pattern pieces and what not. TIA!!

Hello!

I have a puzzle i want to make into a mouse pad.

I will glue either a pane of glass or acrylic on top of it to protect it from wear and tear but I don't know what kind of glue i could use that would be invisible.

Or if not how can i attach the puzzle to the glass/acrylic pane?

It is a regular cardboard puzzle.

Thank you!

I'm planning to customize my boring phone case with a metallic Batman logo for a subtle, stealth-style look. I'm considering something like the Rugged Armor, but its back has a textured, rubbery TPU finish.

My concern is that a rigid metal emblem won't sit flat on the textured surface, and I'm worried that adhesive alone might not hold up with everyday use.

I initially thought to use laser etching to create a recess and paste the metal emblem, but then the TPU would melt off. I am ok with other case material too, but i just love this one.

I'm looking for ideas that would make the emblem look clean and intentional, almost like it came that way from the factory.

Has anyone attempted something similar? I'd love suggestions for materials, mounting techniques, or alternative approaches that would keep the logo secure without ruining the case's finish.

The goal is a subtle black-on-black or dark gunmetal aesthetic, not a flashy decorative look. (images are from internet for a reference).

i need help figuring out the name for this, i can’t find it anywhere. i’m looking for just a styrofoam face but NOT the full round head, just cut in half so it’s only the face with a flat back. i can’t find the name or find what im looking for anywhere im only seeing full heads. if anyone knows what im talking about please let me know!! thank you!